Reimers Steamer DELUXE, 2 GAL.Capacity

These Steam Cleaners are the finest in the industry and the most popular models in the USA. Definitely the most for your money. They are engineered for many years of trouble-free service. The 2 gallon (7.5 liter) tank assures long periods of uninterrupted service. All boilers are built in accordance with the requirements of the ASME boiler and pressure vessel code and bear the National Board stamp. Each unit is steam tested at the factory.

FEATURES

• New compact design with stainless steel cabinet
• End mounted components for easy access
• Manual reset low water cut off
• Larger tank and usable capacity produces high quality, clean steam.
• Produces 5 lbs. / 2.3 kgs. of steam per hour
• Pressure Range from 5 to 85 p.s.i. / 0.3 to 5.8 bar.
• Hand filled through inlet funnel.
• Operates with electric foot switch and steam solenoid valve.
• Provided with easily viewed gauge glass.

For more information about the product you can visit JewelersToyStore.com

Premium X-tra Rosenthal Investment 50 LBS

Super High Quality fine grain investment. For the ultimate in detail and precision. Xtra thermal stability for high metal melts temperatures, flask temperatures, burnout temperatures, and casting temperatures. 

An excellent choice for casting palladium white gold and plastic or resin pattern materials!


Eliminate orange peel defects associated with metal/mold reactions. 


Eliminate flashing & spalling associated with investment breakdown during burnout of plastic & resin pattern materials


Just want to use one investment? X-tra Premium can be used with yellow gold too.


NOTE: This product is not recommended for platinum or stainless steel casting 

For more information about the product you can visit JewelersToyStore.com

Prolonging the life of your Jewelries

Woman really loves keeping their things specially their jewelries. On this article, we will provide you ways on how to prolong the life of your jewelries.

Here are some tips that we have to prolong the life of your jewelries:

1. If you are going out and need to put on some make up, make sure to put your make up on first before wearing your jewelries.
2. If you will be cleaning you need to remove your jewelries because chemicals can damage your jewelry.
3. Make sure to remove your jewelries before you go to the shower. We all know that soap can loosen a ring so, you might lost your ring if you shower with it.
4. Chlorine and salt can also damage your jewelries. If you will be swim on a pool or on a beach make sure to remove your jewelries first.
5. Before doing anything strenuous makes sure to remove any gold or silver accessories because that type of metal are soft.

Those are just some of the tips that we have but those are very helpful to keep your jewelries and for it to last longer.

Storing your Jewelries

Making your own jewelries is not that easy. You need to spend time and effort just to create a very simple accessory. That is why, you need to make sure that you are keeping your jewelries the right way. You don’t want your jewelries to be broken after using it for a couple of times.

There are lots of easy ways to fix jewelries, the most popular ways is by using a laser welder. But to make sure that your jewelries will stay longer we will provide ways on how to store your jewelries.

The first thing that you need to do is to consolidate your jewelries. You can create an inventory list of your jewelries and itemize your jewelries according to metal type and kind such as gold, silver, rings, bracelets, earring, necklaces and many more.

The next thing you need to do is to find a jewelry box with compartment. You also need to keep it on a dry place with low humidity.

Those are just some of the things that you can do to make a jewelry last longer. And also to avoid paying more in fixing it but, if you are planning to buy your own machinery to keep your jewelries perfectly. You can buy machineries at JewelersToyStore.com

Significance of Jewelry

Jewelries have been used for ages by different people. Whether its for a man or a woman.

Jewelries are being used to accessories, they are using it to feel and look for elegant, especially for a woman. An event will not be complete for a woman if she’s not wearing jewelries.

Woman loves jewelries so much in which they are intend to buy jewelries that will going to match to the dress that they currently have. Aside from that, they are also using it in different occasions. A woman feels very satisfied every time they wear perfect jewelries for their outfit.

That is the reason why JewelersToyStore.com is offering different type of tools and supplies to be used in making your own jewelries. This is for those persons who love accessorizing but wanted to have their own fashion statement.

Start checking the website for you to know more about the products that we offer.

Jewelers Home Video

If you are looking for an easy instruction or guide that can help you in soldering, casting, cutting jewelries JewelersToyStore.com has a list of videos to choose from that will suite your needs.

For more information about thhe home video you can visit our website at www.JewelersToyStore.com

WAX INJECTOR, 110 VOLTS.

Rugged construction and precision engineering make this wax injector practically maintenance free. Both hands are free for holding mold while injecting wax. Requires 5 to 8 lbs. of pressure which can be supplied by compressor. Made in USA.       
   
Features
Features include accurate temperature control, fine pressure regulator, safety valve, on-off switch with pilot light and wax drain for easy cleaning. Air compressor and thermometer (T40)not included. One year warranty. Capacity: Wax capacity 51/2lbs. 23/4qt. Dimensions 10''dia 110 volt.

For more information about the tools visit www.JewelersToyStore.com

Wire Draw Machine

The art or process of wire drawing is to draw a wire of a bigger diameter through a hole with smaller diameter. Through plastic wire draw machine is reducing the diameter while the volume remains the same.
    
Automatic operation for 5 passes through drawing dies. For high production of wire. Friction coupling allows for wire to be drawn
at a constant tension regardless of winding speed. Automatic lubrication of drawplates. Equipped with filings recovery filter.

For more information, you can visit our website at www.JewelersToyStore.com

BENCHMATE™, PACKAGE PLUS

BenchMate™ is a powerful holding system that stabilizes stone setting, speeds up soldering and simplifies jewelry repair. BenchMate™ reduces the hand force needed to set stones.

You can set more stones per day and do a nicer job with less strain and greater confidence.
Special attachments turn BenchMate™ into an advanced soldering aid. You'll finish jobs like prong retipping, shank repair and ring sizing, faster.

BenchMate™ simplifies complex jewelry fabrication and torch work, making you a better jeweler. Using BenchMate™ requires no major change to your work methods. Just fasten the tapered Fixed Mounting Plate on the front of your bench.

This plate mates with every BenchMate™ attachment including: Basic BenchMate™ Holder, Bench Pin, Engraving Vise Shelf, Sawing Plate, BenchMate™ Vise, Double Soldering Station. To change attachments, you lift them up and off the tapered Fixed Mounting Plate.

It takes three seconds and requires no tools. This patented system keeps your work centered in front of your bench at the right height. You'll maintain good body posture for greater comfort throughout the day.

The Basic BenchMate™ Holder tilts and rotates to any position while you work on rings, pendants, earrings, and other jewelry. Its jaws hold both jewelry and other attachments including: Narrow Solder Fingers, Wide Solder Fingers, Shellac Pads, Pitch Cup, and 4" (100mm) Solder Station.

The holder moves freely in all directions, or you can add selective resistance by tightening the pivot knobs.

You can also lock it solidly in any position. The BenchMate™ Holder moves only when and where you want. This eliminates accidental slips that can ruin your work or injure you.

• INCLUDES
• BenchmateTM
• Shellac Pad
• Both Soldering Clamps
• (2)Third Hand Attachment
• Soldering Pad Assembly
• Bench Pin Kit
• Fixed Mounting Plate

Mounting Hardware

For more information about the product please visit www.JewelersToyStore.com

Foredom 1/6 hp SR motor and FCT speed control

A Motor with All the Best Features plus More Power The 1/6HP Series SR is our most popular motor and runs at speeds up to 18,000 RPM. It combines the most important features our customers expect–power, reversibility, reliability, and versatility– all into one motor. More Power: The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads.
Reversible: This great feature is not well understood by many of our users. Here are some of the advantages: Left handed users have more control of the cutting tool when in reverse Reverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out drill bits that are stuck Alternating motor direction makes it easier and faster to polish metals Please see the yellow box in the middle of the page to learn more about running in reverse rotation. Reliable: Two year warranty on 1/6 HP Series SR Motors and Controls. 18,000 RPM Max Speed . Versatile: SR motors are available in both 115 Volt and 230 Volt. The SR come with standard 39" long flexible shafts and sheaths for connecting to any of Foredom’s 20+ ‘quick disconnect' handpieces.

The SR hang up style motor operates in forward and reverse at speeds up to 18,000 rpm and comes supplied with Foredom's standard shaft and sheath. The FCT foot operated control included in this motor-control combination is a solid state control in a heavy cast iron housing for added stability on the floor. The handpiece is not included - please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.

You can visit www.JewelersToyStore.com for more information.

ANTILOPE SAWBLADES

Jewelry Making requires premium sawblades. Top of the line, uniform in size, designed for jewelers. Antilope® sawblades are made of high quality alloy steel tempered and hardened.  Known to consistently cut straight, and extremely sharp for fast cutting. Sold by the dozen. Made in Germany

Antilope® Jewelry sawblades are made of high quality alloy steel tempered and hardened. Known to consistently cut straight, and extremely sharp for fast cutting. Order one today visit www.JewelersToyStore.com

Benchmate Package

BenchMate is a powerful holding system that stabilizes stone setting, speeds up soldering and simplifies jewelry repair. BenchMate reduces the hand force needed to set stones.

You can set more stones per day and do a nicer job with less strain and greater confidence.
Special attachments turn BenchMate into an advanced soldering aid. You'll finish jobs like prong retipping, shank repair and ring sizing, faster.

BenchMate simplifies complex jewelry fabrication and torch work, making you a better jeweler. Using BenchMate requires no major change to your work methods. Just fasten the tapered Fixed Mounting Plate on the front of your bench.

This plate mates with every BenchMate attachment including: Basic BenchMate Holder, Bench Pin, Engraving Vise Shelf, Sawing Plate, BenchMate Vise, Double Soldering Station. To change attachments, you lift them up and off the tapered Fixed Mounting Plate.

It takes three seconds and requires no tools. This patented system keeps your work centered in front of your bench at the right height. You'll maintain good body posture for greater comfort throughout the day.

The Basic BenchMate Holder tilts and rotates to any position while you work on rings, pendants, earrings, and other jewelry. Its jaws hold both jewelry and other attachments including: Narrow Solder Fingers, Wide Solder Fingers, Shellac Pads, Pitch Cup, and 4" (100mm) Solder Station.

The holder moves freely in all directions, or you can add selective resistance by tightening the pivot knobs.

You can also lock it solidly in any position. The BenchMate Holder moves only when and where you want. This eliminates accidental slips that can ruin your work or injure you.

• INCLUDES
• BenchmateTM
• Shellac Pad
• Both Soldering Clamps
• (2)Third Hand Attachment
• Soldering Pad Assembly
• Bench Pin Kit
• Fixed Mounting Plate
• Mounting Hardware

Cleaning a Jewelry

You have lots of jewelries and it was on your jewelry box do you have time to clean it?

In cleaning a jewelry you need to scrub or polish it but how can you clean jewelry without ruining its quality? How can you remove those dirt’s and grime?

Before you start cleaning your jewelry you need to make sure that the jewelry are secured and well fastened to avoid loosing a piece of it. You also need different cleaning cloth that will match the quality of your jewelries. Cleaning a gold jewelry is very different in cleaning your silver jewelry.  There are some cleaning chemicals that might damage your jewelries and it is very important to start cleaning your jewelries in a gentle manner.

Nowadays, because of technology you can now clean your jewelries in just a couple of minutes. How? By using a sparkle spa ultrasonic it has a power of a professional jewelry cleaner that is quick and easy top use. You can also use distilled water or a cleaning solutions. The ultrasonic device will be the one who will going to remove the dirt and grime and also the tarnishing of jewelry.

For more information about the tools in cleaning your jewelries you can visit Rosenthal Jewelers Supply where you can buy wholesale jewelry tools and supplies at a very low price.

Jewelers Toy Store: Laser Welding Tips and Techniques

Frank McAllister, CEO of a well known Mining company studied the quantity of a jewelry that was made from 950 palladium has surpassed the same for platinum products. He calculated the number of ounces that was used globally for each alloy.

If you will going to use a laser welding to the 950 palladium you need to make sure that it was setup properly. Laser welding's equipment settings and technical procedure might differ to platinum. The three most requested bench tasks that was used for a successful laser welding of 950 palladium products are:

1. Filling voids and pits

2. Minor assembly

3. Ring sizing

Research was conducted to do some testing for them to be able to use the laser welding perfectly specially for a 950 palladium. It is very important that the settings of the laser machine are correct and equipment should be maintain properly to avoid any bad effect for the final outcome. For us to explain clearly, we will going to explain how those bench tasks works.

Filling Voids and Pits

During the casting process with jewelries alloy most often result to voids and pits. By using laser welding you can hit the void several times to open and shape it. The tip of the wire was held in direct contact with the palladium piece, within the void and a pulse of energy melted 950 palladium from the wire into the void. Each void was overfilled with 950 palladium and then filed even with the surface of the ring for finishing. Make sure that when filling voids and pits using a laser you should start by directly to the void. On this way, it will melt the bottom and will expose fresh metal from which to build upon.

Minor Assembly

For minor assembly the most effective way is to tack the parts using a laser welder followed by soldering to complete the process.

Ring Sizing

It is not always safe to resize a palladium using a torch because gemstones are heat sensitive. Because of that we need to set the equipment properly to avoid the metal become brittle.

Experts continuously do some research about the best options for using a laser welder. But, as of now it is much easier to follow those procedures to avoid breaking the metals that you have.

Laser Welder For Sale

Are you looking for a laser welder that is reliable and easy to use? Or, maybe you are looking for a company who can provide you a laser welder and can help you on how to use it?

“Buying a laser welder for us was quite a big step in separating ourselves from others in our town.  We can now offer the latest technology on the market.  Whenever we considered buying a laser welder we searched out several vendors.  But the choice for us was easy.  The machine that you sell is by far, in our opinion, the best laser welder on the market.  Other companies could not compare when it came down to the overall complete packages.  Rosenthal exceeded our expectations tremendously.”  From, Barnes Jewelers Inc.

Laser Welder works as a soldering machine, it can also be used for retipping and fixing jewelry cracks. It can fix any type of jewelry such as titanium, platinum, silver, steel, gold and many more.

Because we are going to use laser that means we are using the energy of light with a very thin light that can be used in a hard to reach areas of jewelry. Because we are using a light energy then that light energy will be converted into a thermal energy and became a concentrated energy. This concentrated energy will produce melting and coalescence on that way jewelry will be melted easily.

To purchase a laser welder you need to choose what’s best for your jewelry business. In Rosenthal, there are two types of laser welder that you can choose from. First one is the Desktop Laser Welder, this laser welder are for lightweight repairs. Because it is lightweight that means it is much easier to transport and to maintain. Another laser welder that we offer is a Bench Top Pro Laser BD-60, this can perform just like a larger sized welding machine. This machine was designed for the users who are looking for a machine with the ability of a larger machine but not that expensive.

In conclusion, if you are looking for a laser welder that is reliable and easy to use, Rosenthal Jewelers Supply can provide it to you. Aside from that, they can also train you on how to use it. Customers satisfaction is very important.

Metal Smithing

What does metal smithing means? What does a metal smithing do to create jewelries?

Metal smithing, just like black smith a metal smith is a person that involves creating object for example jewelry out of metal. Metal smithing is the process of creating the object out of metal.

To get started as a metal smith you need some tools that’s the first investment that you need.

Here are the tools that you needed to become a metal smith:

Bench Pin. It will allow the jewelry maker or metalsmith to have a good firm handle on any item of jewelry that is being made, repaired, designed or created Made of wood.

Saw frame. Made of steel with comfortable hardwood handles. Available in various sizes and qualities, will accommodate
all standard jewelers saw blades.

Set of pliers. A must for metal smithing, diamond and gem setting, Bead smithing, beadstrining, making jump rings, jewelry repairs, and more. These, Jewelers Pliers are made and designed for the jeweler in mind, comfort handle, economical, and well constructed allow the jeweler to use for hours, day after day with confidence in the performance.

Needle Files. Precision files for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.

Solder. Comes in sheet and wires. You also need soft, medium, and hard solder.

Brush. You can use a paint brush to apply flux.

Flux. Used to help the solders stick to the metal. You can use flux in paste form for easy application.

Those are some of the things that a metal smith needed to start creating jewelry out of metal. Those tools can be purchased at your local hardware or you can also visit Rosenthal Jewelers Supply website.

Handmade Jewelries

Creating your own jewelries is really a fun thing to do. To think that you will be creating your own jewelries with a personal touch. You can choose your own color, gemstone and you can also create your own design. Aside from that, you can even sell those jewelries to your friends.

There are some points to remember in creating your own jewelries.

·        You need to make sure that you have the best materials that are available in your area

·        Don’t even try to use a fishing line to create your jewelries

·        Use nylon coated string to start creating your jewelries

·        When you start creating your jewelries make sure it is not too tight to prevent from breaking. You also need to make sure its not too stiff

·        Make sure that you are creating the right size for the right jewelries. You can use a bead stringing board to get the precise size of the craft

·        Once you already finished creating your jewelries make sure you also take good care of it

Those are the tips that you can bear in mind in creating your own craft. If you follow those tips we can assure you that you will be creating the best craft that you’ve ever made.

Aside from that, you also need to know how to take good care of the craft that you created. Just like what the last points to remember.

Once you already created a craft you need to make sure not to wear it during sports time. You can also avoid using chemicals that might affect the materials that have been used. Instead of using chemicals you can just use a cleaning cloth to clean your jewelries. You can also remove your jewelries while cleaning the house and doing other household chores.

Once you are able to follow that we can assure you that your jewelries will last longer. And other people might think of getting one of it and might inform their friends about it. And that’s the start of your jewelry business.

Stone to Test Gold

There are lots of ways to test gold. Because gold is also one of the precious stones that we have we need to make sure that you are getting the value of your money.

We all know that a real gold is really expensive. You need to spend thousands of money just to get a small piece of gold. That is why lots of jewelers are using different ways to test gold.

Some of the jewelers use acid, electronic devices and some are using a special stone to test gold.

The stone that are being used to test gold is a dark stone. It is used to test the karat of gold as well as silver and even platinum.

How to use the gold test stone?

To use it you just need to rub the pieces of gold to the stone. If you see a yellow strike on the dark stone that means it is pure gold.

Some jewelers are also using magnet to test gold. They will hold a magnet near the stone and see if it will attract the gold. If it will that means there are other metals that are included on the said stone.

For more information on the tools to test gold, you can visit the website www.JewelersToyStore.com

Presidium Duo Tester

Identify Diamonds & Colored Stones!
The PRESIDIUM DUOTESTER is the only tool on the market that provides the user with two proven tests for diamonds and the ability to differentiate between similarly colored gemstones. The easy-to-read dial of the DUOTESTER is calibrated to indicate the differences in thermal conductivity of the most popular gemstones and simulants. Simply touch the tip of the thermal conductivity probe pen to a mounted or loose stone. Diamond is easily identified by any reading in the green area of the dial, and colored gemstones can be easily differentiated from one another by the clearly labeled zones provided in the red area. Even coated gemstones can be accurately tested.

DIGITAL REFLECTIVITY MEASUREMENT
Diamond and its simulants reflect light proportionally to their respective refractive index. The PRESIDIUM DUOTESTER provides the user with a digital reflectivity meter and an easy to use Simulant Reflectivity Chart. The reflectivity number from the meter is simply cross-referenced with the chart to identify the stone. An unknown gemstone can be tested for its thermal conductivity and, if necessary, the results can be confirmed with a quick and simple reflectivity test. All stones indicated as diamond by the thermal tester should be tested with the reflectivity meter to test for Synthetic Moissanite, thus providing double the assurance for the same price.

Easy Fail Safe Calibration
The PRESIDIUM DUOTESTER comes complete with built in diamond and simulant test discs for easy calibration of the thermal tester. Calibration of the Reflectivity Meter is made easy with the optional, built in diamond substitute set.

Convenience
The thermal probe pen includes a metal warning detector that emits a audible buzz if the gem mounting is accidentally touched. The DOUTESTER can be powered by 5 AA alkaline batteries or by the electrical adapter provided.

Guaranteed Quality
The PRESIDIUM DUOTESTER is manufactured under rigid quality standards. The user is assured of the highest satisfaction and dependable service from this PRESIDIUM instrument. Each DUOTESTER is tested for functionality before shipment.

All About Diamond Tester

Diamond is known as girls best friends.

A diamond is a transparent type of crystal that is mostly used in creating and accessorizing different jewelries. It is also known as the hardest type of stone. Because it is the hardest it can even cut glasses and also this is the only stone that can scratch other gemstones.

Because diamonds is one of the well known stones and one of the precious stones that we have all over the world. That is the reason why some people or jewelers are creating a stone like jewelries but are not real. That is why a tester is created or invented.

Presidium diamondmate are created to utilize proven thermal conductivity testing method to instantly verify the authenticity of diamonds,

Because it was created to test diamond it will also provide you indication whether a diamond is real or not. It has a light indicator that indicates the quality of the diamonds.

For more information about the said product, you can visit the website at www.JewelersToyStore.com

Desktop Laser Welding

Laser welding is one of the most popular tools that can be used in creating different types of jewelries. Aside from that it can also be used in fixing, welding, soldering a jewelry.

Currently, JewelersToyStore is offering BD 60 Pro Micro Laser is the most cost effective laser available. It can out perform many other larger sized welders and it's small size allows it to be used in any facility. For use on gold, Platinum, silver, titanium, and steel alloys. The BD 60 Pro is designed for users that want the abilities of a larger machine but, are excluded by the cost. Application: For retail repair shops Jewelry design and repair, watch and eye glasses, medical technology material deposit, and repair of small molds and inserts.

For more information about the said tools, you can visit www.JewelersToyStore.com

Abrasive Paper

There are different types of abrasive paper:

·        3m Platinum

·        Emery

·        Water Proof

·        3m Wet/Dry

·        Metalite cloth

3M Platinum abrasive are uniquely designed for platinum jewelries.

Emery Paper is used for smooth and glossy finish. For you to be able to achieve the smoothest finish you can use the high quality emery in which grains are bonded on flexible paper. It is also designed to remove scratches, dry polishing, or lapping gold, silver, brass and copper. Also used for light deburring and cleaning heavy stock.

Waterproof paper abrasives was used for more aggressive waterproof paper sheet sanding applications, jewelers use Durite Waterproof Paper.  Packed in protective dispensers to eliminate waste and permit easy, neat storage. Typical applications include intermediate and final sanding of jewelry. These sheets have Aluminum oxide grain electro-coated on flexible cloth backing. Out performs emery. Leaves a smooth even finish.

3M wet or Dry Polishing Paper provides excellent flexibility for finishing and polishing plastics, metal and coatings. Used by jewelers, these polishing papers are pliable, non-woven, lint free backing, coated with micron graded aluminum oxide and silicone carbide particles slurry coated onto a non-woven synthetic backing, the superior flexibility of this product allows for fast and easy finishing and polishing on to almost all contoured surfaces.

Metalite Cloth is ideal for general metal sanding, scouring, deburring, and removing rust. Aluminum oxide grain is close-coated on cloth backing for aggressive cutting action, long life and fine finishes. These sheets out performs emery and is used extensively for polishing, deburring of jewelry made of gold, silver, platinum and other metals.

For more information about the product, you can visit our website at www.JewelersToyStore.com

Platinum Casting Machine

Platinum casting machine is a top quality heavy duty aluminum cast construction and stainless steel arm at a great value price. This platinum vertical centrifugal machine is your one stop solution for platinum casting.

According to jewelers, it is much harder to cast platinum than other metals. That is why they come up with a machine for casting platinum. Their goal is to get a good quality every time they cast platinum and any other metal.

This machine has a step by step procedure on how to use it and how to take care of it.

For more information about the Platinum casting machine, you can visit our website at www.JewelersToyStore.com

KAYA Casting Vacuum Machine

KAYA Casting Vacuum machine is a high quality machine that was designed to outperform and outlast any comparable unit in the industry.

KAYA Casting Vacuum Machine includes:

·        A crucible handle

·        Flask sleeve

·        Bell jar

·        Sprue base

·        Vacuum pump oil

·        Perforated flask

For more information about the KAYA Machine, please visit our website at www.JewelersToyStore.com